MC200
DIGITAL CURRENT CLAMP
Features
. Clamp open 28mm
. Portable design, easy use
. Full function protection, strong anti-interferential performance
. CE standard design, improving the safety of test
. Max/Min, data hold
. Non-contact voltage testing with visible alarm
. Clamp light display and backlight display
. True RMS
. Battery function
Technical data | MC200 | |
Basic function | Range | Basic Accuracy |
DCV | 200mV / 2V / 20V / 200V / 600V | ±(0.5%+5) |
ACV | 2V / 20V / 200V / 600V | ±(1.0%+5) |
ACA | 2A / 20A / 200A / 600A | ±(2.0%+5) |
Resistance | 200Ω / 2kΩ / 20kΩ / 2MΩ / 20MΩ | ±(0.8%+3) |
Special function | ||
NCV | √ | |
TRMS | √ | |
Clamp light display | √ | |
Backlight display | √ | |
Diode test | 0V~2V, it displays “OL” if over 2V | |
Data hold | MAX/MIN,HOLD | |
Function protection | √ | |
Continuity alarm | Less than 50Ω, it displays “OL” if over 200Ω | |
Low battery indicator | Approx. less than 2.4 V | |
Auto power off | About 15 minutes | |
General characteristic | ||
Input impedance | 10MΩ | |
Sampling rate | 3 times/s | |
AC frequency response | Current(50-60)Hz / Voltage(50-400)Hz | |
Operation method | Manual or auto range | |
Max. display | 1999 | |
Clamp open | 28mm | |
Battery | 3V AAA×2 | |
Meter weight | 200g(including battery) | |
Standard accessory | Test leads, battery, manual |